Remove the master brake cylinder by unscrewing the mounting bolts.
Remove the brake booster by unscrewing the mounting bolts.
After loosening the clamp, disconnect the clutch master cylinder reservoir tube from the clutch master cylinder.
Drain the liquid into a plastic container.
Disconnect the flexible hose from the clutch master cylinder.
Using a special tool, connect the flexible hose and tighten the fastening nut.
Connect the clutch master cylinder reservoir tube with clamp to the clutch master cylinder.
Fig. 3.10. Clutch release master cylinder components: 1 – clamp; 2 – clutch release hydraulic tube; 3 – nut; 4 – clutch release master cylinder; 5 – gasket
Caution: Connect the clutch master cylinder reservoir tube so that it is not bent.
Install the brake booster.
Install the master cylinder.
Bleed the master cylinder.
Bleed the brake system.
After filling the master cylinder reservoir with clutch fluid, bleed the air from the clutch system.
Check and adjust the brake pedal height.
Check and adjust the clutch pedal assembly.
Check for brake fluid leaks.
Check for clutch fluid leaks.
Check the fluid level in the clutch reservoir.
[The original text can be found on: mazbook]