Contents: Checking the oil ⇓ Oil change ⇓
Fig. 3.26. Checking and replacing oil in a manual gearbox
Checking the oil
Place the vehicle on a level surface.
Remove the oil level plug and washer.
The oil level should be near the edge of the hole.
If the oil level is below the edge of the hole, add oil of the same type through the oil level inspection hole.
Oil class: API Service GL-4 or GL-5.
Oil viscosity:
- all-season: SAE 75W-90;
- above 10°C: SAE 80W-90.
Install a new washer and oil level plug.
Tightening torque: 40–58 Nm.
Oil change
Remove the drain plug with washer.
Drain the oil into a suitable container.
Install a new washer and drain plug.
Tightening torque 40–58 Nm.
Remove the oil level plug and add oil of the same type to the edge of the hole.
The original text is published on: mazbook.ru
Filling volume (approximate quantity): 2.87 l.
Install a new washer and oil level plug.