Place the unloaded vehicle on a horizontal surface.
Place one person in the driver's seat.
Place the car 3m away from the white screen.
When adjusting one fog light, cover the other.
Start the engine to recharge the battery.
Turn on the front fog light.
Fig. 7.32. Adjustment by turning the adjusting screws
Adjust the front fog light by turning the adjusting screws as shown in Figure 7.32. First loosen the screws, then tighten them.
Fig. 7.33. Fog lamp light spot adjustment diagram
Note: If you tighten the adjusting screws first and then loosen them, they will come loose while the vehicle is moving, causing the headlights to be out of alignment.
Based on website data MAZBOOK.ru