Note.
The front fog lamps must be adjusted after performing the following operations:
- Removal and installation of front fog lamps.
- Work affecting vehicle height (e.g. removal/installation or replacement of suspension elements).
1. Unload the car, removing all passengers and cargo from it, except for the spare wheel, jack and tool kit.
2. Adjust tire pressure to normal.
3. Place the vehicle on a level surface.
4. From white paper, create the screen shown in the figure.
5. Place the screen in front of the car so that the distance from the wall to the headlight is 3 meters.
6. Measure the height of the center point of the front fog lamp.
Note. It is necessary to measure the height of the center point of the fog lamp at which adjustment will be made, since the height of the vehicle may differ depending on various conditions.
7. Align the center of the fog lamp with the center of the screen.
8. Cover the front fog lamp, which is not adjustable.
9. Start the engine to recharge the battery.
10. Turn on the front fog lights.
11. Make sure that the fog light border matches the position on the adjustment screen.
12. If the headlight refraction point does not match the position on the adjustment screen, adjust the headlight position as follows:
- Loosen the bolt and fixing screw.
By moving the front fog lamp in the direction of the arrows in the figure, adjust the position of the light border with the corresponding position on the adjustment screen.
Tighten the bolt.
Tighten screw.