2. Remove the following parts:
- decorative panel.
- front console box.
- switch panel.
- top panel.
- rear console.
- side walls.
- front console.
3. Insert a flat-head screwdriver wrapped in electrical tape into the gap between the ring retainer and the socket.
4. Using a flat-head screwdriver in the direction of the arrow (1) in the figure, press the cigarette lighter in the direction of arrow 121 in the figure and detach the ring retainer from the socket.
5. Pull the cigarette lighter in the direction of the arrow in the figure and remove it.
6. After pressing the ring fasteners in the direction of the arrows (3) in the figure, press the ring in the direction of the arrow (4) to disconnect the ring fasteners from the front console.
7. Remove the ring.
8. Installation is carried out in the reverse order of removal.