2. Unscrew the screws and bolt.
3. Pull back the front protective tray No.1 and unscrew the mudguard screws shown in the figure.
4. Disconnect the connector.
5. Vehicles without parking sensors: While squeezing the retainer tabs in the direction of the arrows (1) in the figure, press the retainer in the direction of the arrow (2) in the figure to detach the retainer from the bracket.
6. Remove the retainer.
7. Loosen the screws.
8. Remove the front fog light with the bracket.
9. Unscrew the bolt and screw.
10. Remove the front fog light.
Warning. The halogen lamp becomes very hot during operation. If the surface of the lamp is dirty, the service life of the lamp will be significantly reduced due to heating. When replacing the lamp, hold it by the base, not by the bulb.
11. Installation is carried out in the reverse order of removal.
12. Adjust the light level of the fog lights.