Remove the plug hole plate.
Remove the high voltage wire.
Disconnect the oil control valve (OCV) connector.
Measure the resistance between terminals A and B with an ohmmeter.
Remove the ventilation hose.
Remove the cylinder head cover.
Fig. 2.102. Powertrain components removed when removing the timing chain: 1 – cylinder head cover; 2 – crankshaft pulley mounting bolt; 3 – crankshaft pulley; 4 – coolant pump pulley; 5 – drive belt tension pulley; 6 – rubber support for engine No.3 and engine mounting bracket No.3; 7 – Front engine cover; 8 – front oil seal; 9 – chain tensioner; 10 – tensioner lever; 11 – chain guide; 12 - timing mechanism drive chain; 13 – seal; 14 – oil pump chain tensioner; 15 – oil pump chain guide; 16 – oil pump sprocket; 17 – oil pump chain; 18 – camshaft sprocket
Remove the oil control valve (OCV) (fig. 2.102).
Fig. 2.116. Removing the oil control valve (OCV): 1 – Oil control valve (OCV)
Install in the reverse order of removal.