Discharge the refrigerant.
Remove the right mudguard and splash guard.
Loosen the drive belt tension and remove the belt.
Caution! If moisture or impurities enter the cooling circuit, the cooling capacity of the circuit will be reduced and abnormal noise will be heard. Always plug open fittings after removing any components of the cooling circuit to prevent moisture or impurities from entering the circuit.
Fig. 8.89. Removing the air conditioning compressor: 1 – cooler hose (upper); 2 – cooler hose No.4 (left hand drive vehicles); 3 – magnetic clutch connector; 4 – Air conditioning compressor
Remove in the order shown in Figure 8.89.
Install in the reverse order of removal.
Adjust the drive belt tension.
Perform operational tests of the air conditioning system.
[Original material on the website Mazbook.ru]