Discharge the coolant.
Remove the right mudguard and mudguard.
Loosen the drive belt tension and remove the belt.
Attention! If moisture or impurities enter the cooling circuit, the cooling capacity of the circuit is reduced and abnormal noise is heard. Always plug open fittings after removing any parts of the refrigeration circuit to prevent moisture or impurities from entering the circuit.
Pic. 8.68. Removing the air conditioning compressor: 1 - cooler hose (upper); 2 - cooler hose No. 4 (left hand drive vehicles); 3 – magnetic clutch connector; 4 - air conditioning compressor
Remove in the order shown in Figure 8.68.
Install in the reverse order of removal.
Adjust the drive belt tension.
Perform performance tests on the air conditioning system.