Fig. 8.73. Measuring the circumferential clearance between the pressure plate and the compressor pulley
Measure the circumferential clearance between the pressure plate and the air conditioning compressor pulley using a feeler gauge (Fig. 8.73).
Make sure the gap is within specifications.
Fig. 8.74. Installing a new gasket between the pressure plate and the compressor pulley
(The article is copied from the website MAZBOOK.ru)
If this is not the case, remove the pressure plate and adjust the clearance by selecting a 0.2-0.5 mm shim or several shims (Fig. 8.74).