Check the front wheel bearing clearance and adjust if necessary.
Check tire and wheel runout.
Check the ball joints and steering linkage for excessive play.
Rock the car to check the operation of the shock absorbers.
Note: The vehicle must be unloaded. Fill the fuel tank completely and place it on a horizontal, level surface.
Engine coolant and engine oil levels must be normal.
The spare wheel, jack and tools are in their regular places.
Measure the height from the center of the wheel to the edge of the fender.
Fig. 4.6. Scheme of preliminary check of wheel alignment angles
The difference between the measurement result on the left and right should not exceed 10 mm.