2. Accelerate the car to the required speed (not less than 30 km/h).
Press and release the switch "SET/ COAST" at the vehicle speed you want to maintain. At the same time, release the accelerator pedal.
Do not hold the switch down. Otherwise, if the driver does not press the accelerator pedal, the vehicle speed will decrease until the switch button is released. In this case, you may miss the desired speed.
Note: The "SET" function for setting the desired speed cannot be activated until approximately 2 seconds have passed after the main "ON/OFF" switch has been pressed. On a steep slope, the vehicle may quickly lose speed when going uphill or quickly gain speed when going downhill.