2. Accelerate the car to the required speed (not less than 30 km/h).
Press and release the "SET/COAST" switch at the vehicle speed you wish to maintain. At the same time, release the accelerator pedal.
Do not hold the switch down. Otherwise, if the driver does not press the accelerator pedal, the vehicle speed will decrease until the switch button is released. In this case, you may miss the desired speed.
Note: The "SET" function for setting the desired speed cannot be activated earlier than 2 seconds after pressing the main "ON/OFF" switch. On a steep slope, the vehicle may quickly lose speed when moving uphill or quickly gain speed when moving downhill.