Fig. 3.48. Checking the clearance between the 3rd and 2nd gears
Measure the gap between the 3rd and 2nd gears (Fig. 3.48).
If the gap exceeds the maximum, check the contact surfaces of the 2nd and 3rd gears, the 3rd/4th gear synchronizer clutch. Replace worn and damaged parts.
- Gap: 0.05–0.20 mm.
- Maximum: 0.25 mm.
Fig. 3.49. Checking the clearance between the 4th gear pinion and the bearing
Measure the clearance between the 4th gear pinion and the bearing (Fig. 3.49).
If the clearance exceeds the maximum, check the contact surfaces of the 4th gear pinion, bearing and 3rd/4th gear synchronizer sleeve. Replace worn or damaged parts.
- Gap: 0.17–0.37 mm.
- Maximum: 0.42 mm.