When voltage is applied to the input «A» or «IN» voltage appears at the output «WITH». If to the entrances «A» And «IN» low voltage applied (0 V), then at the output «WITH» the voltage is also 0 V. When a high voltage is applied (12 V) at the entrance «A» or «IN», the same voltage is available at the output «WITH». See relay diagram on the right | ||
When voltage is applied to the input «A» or «IN» voltage appears at the output «WITH». When applying high voltage (12 V) at the entrance «A» or «IN», the same voltage is available at the output «WITH». If the inputs «A» And «IN» low voltage applied (0 V), at the exit «WITH» the voltage is also 0 V. See the relay diagram on the right | ||
When voltage is applied to the input «A» exit «IN» closed to mass. When applied for entry «A» low voltage (9 V), exit «IN» is under high voltage (12 V). See relay diagram on the right | ||
PROCESS is a simplified designation of a circuit that performs various functions, among which the main ones are: 1. Identification of signals; 2. Signal conversion. The fully electronic ignition control circuit is shown in the figure on the right. |