Remove the front fender.
Loosen the hood hinge adjustment bolts and close the hood.
Fig. 8.8. Hood adjustment bolts
Tighten the bolts (Fig. 8.8).
Fig. 8.9. Checking the gap between the hood and the body
Check the gap between the hood and the body (car body) in the section shown in Figure 8.9.
Gap: a – 2.5–4.5 mm.
Fig. 8.10. Adjusting the height of the hood position
The primary source is the website: www.MAZbook.ru
Turn the adjusting screw to set the required hood height (Fig. 8.10).
Fig. 8.11. Bonnet height
Make sure that the height between the hood and the body (car body) in the section shown in Figure 8.11 is within the specified values.
Height:
- a - 3.0–6.0 mm;
- b - 3.0–6.0 mm.