Remove the plug hole plate.
Remove the high voltage wire.
Disconnect the oil control valve connector (OCV).
Measure the resistance between terminals A and B with an ohmmeter.
Remove the ventilation hose.
Remove the cylinder head cover.
Pic. 2.102. Components of the power unit, dismantled when removing the timing chain: 1 – a cover of a head of the block of cylinders; 2 – a fixing bolt of a pulley of a cranked shaft; 3 - crankshaft pulley; 4 – a pulley of the pump of a cooling liquid; 5 - tension pulley of the drive belt; 6 - rubber support for engine No. 3 and engine mounting bracket No. 3; 7 - front cover of the engine; 8 - front oil seal; 9 - chain tensioner; 10 – tensioner lever; 11 - chain guide; 12 - timing chain drive; 13 - seal; 14 - oil pump chain tensioner; 15 – oil pump chain guide; 16 – an asterisk of the oil pump; 17 – chain of the oil pump; 18 - camshaft sprocket
Remove oil control valve (OCV) (pic. 2.102).
Pic. 2.116. Removing the oil control valve (OCV): 1 - control oil valve (OCV)
Install in the reverse order of removal.