Tighten engine mount bracket bolt B to a torque of 93.1–116.6 N·m.
Tighten the engine support bracket pinch bolt No.1 to a torque of 85.3–116.6 N·m.
Fig. 2.98. Bolts for fastening support No.1
Tighten the tie bolt B on the body to a tightening torque of 93.1–116.6 N·m (Fig. 2.98).
The original article is posted on: MAZbook.ru
Install the remaining components in the reverse order of removal.
Start the engine. Check for leaks of engine oil, coolant, transmission oil, and fuel. Check the ignition advance angle setting, idle speed, and mixture composition.
Take it for a test drive.