Fig. 2.266. Tightening the studs for fastening engine support No.3
Tighten the engine mount studs #3 (fig. 2.266).
Tightening torque: 7–13 Nm.
Install engine support #3 and temporarily tighten the mounting bolts and nuts.
Fig. 2.267. Tightening order of engine mount bolts
Original version of the article on the website [mazbook.ru]
Tighten the mounting bolts in the order shown in Figure 2.267.
Tightening torque:
- 1 (nuts) - 44–61 Nm;
- 2 (bolts) - 74.5–104.9 N·m.