Pic. 2.275. Camshaft bearing cap installation positions
Install the camshaft bearing caps in the indicated positions, as shown in Figure 2.275, and then temporarily tighten the bearing cap bolts No. 2 and No. 7 of the camshaft.
Pic. 2.276. The order of tightening the bolts of the camshaft bearing caps
Tighten bolts of fastening of covers of bearings of a cam-shaft in 2-3 passes in regular intervals in the order shown in drawing 2.276.
Tightening torque: 11.3 - 14.2 Nm.
Install the remaining components in the reverse order of removal.
Check compression.