Fig. 2.146. Pressing in the valve guide bushing: 1 – valve guide bushing
Press the valve guide bushing from the side opposite the camshaft until the special tool stops against the cylinder head (fig. 2.146).
Fig. 2.143. Measured height: 1 – valve guide bushing; 2 – cylinder head
Make sure that the valve guide projection height (dimension A) is within specification (see fig. 2.143).
Standard height:
- Intake: 12.2-12.8 mm;
- Issue: 12.2–12.8 mm.
The article is copied from the website MAZbook.ru