Attention! Technology is constantly evolving. It may be that older models may have different tire pressure values. Therefore, it is recommended to find out the latest data in specialized workshops.
Cars up to 9/89 issue. and all "station wagon" models
| engine/model | tire size | tire pressure in bar | |||
| Half load | Full load | ||||
| in front | behind | in front | behind | ||
| 1.1-l/1.3-l/1.5-l- petrol | 155 R 13 S 175/70 R 13 S 175/70 R 13 82 R 155 R 13 M+S | 2,0 | 1,8 | 2,0 | 1,9 |
| 1.6L without turbocharger with catalytic converter | 175/70 R 13 S 175/70 R 13 82 S 175/70 HR 13 175/70 R 13 82 H | 1,9 | 1,8 | 2,0 | 1,8 |
| 1.6L without turbocharger, without catalytic converter | 175/70 HR 13 175/70 R 13 82 H 185/60 R 14 82 H 155 R 13 M+S | 2,0 | 1,8 | 2,0 | 1,8 |
| 1.6L turbo | 185/60 VR 14 175/65 14 M+S | 2,0 | 1,8 | 2,0 | 1,8 |
| all wheel drive | 185/60 VR 14 175/65 R 14 M+S | 2,0 | 1,8 | 2,2 | 2,0 |
Cars from 10/89 issue, except for "station wagon" models
| tire size | tire pressure in bar | |||
| Half load | Full load | |||
| in front | behind | in front | behind | |
| 155 SR 13 78 S 155/80 R 13 78 S 175/70 R 13 82 S 155 R 13 M+S | 2,0 | 1,8 | 2,2 all-wheel drive: 2, 3 | 2,0 all-wheel drive: 2.3 |
| 175/70 R 13 82 H | 2,1 all-wheel drive: 2.0 | 1,9 all-wheel drive: 1.8 | 2,3 | 2,1 all-wheel drive: 2.3 |
| 185/60 R 14 82 H | 2,1 | 1,9 | 2,2 | 2,1 |
| 175/65 R 14 M+S | 2,2 | 2,0 | 2,4 | 2,4 |
- All pressure data apply to cold tires. Do not release pressure that increases by 0.2 Bar during a long trip.
- Tire pressure spare wheels normal size corresponds to the maximum tire pressure when fully loaded.
- Winter tires usually have a pressure of 0.2-0.3 bar higher. The recommendations of winter tire manufacturers should be taken into account. Since winter tires have a speed limit, a plate indicating the maximum speed should be fixed in the driver's field of vision.
Depending on the model and equipment, the MAZDA 323 can have tires and wheels of different sizes. However, it is permissible to use wheels with a press-in depth of 45 mm. The press-in depth is the distance from the center of the rim to the stop surface of the wheel on the brake disc or drum. All discs are so-called hump discs. A hump is a flange pressed into the shoulder of the rim, which prevents the tubeless tire from being pushed off the disc during a sharp turn. When installing wheels or tires that are not specified in the documents, they must be included in the vehicle documents. As a rule, permission from MAZDA is required for this.
Attention! According to the regulations, the tire tread depth should not be less than 1.6 mm, namely, the profile should have a depth of at least 1.6 mm over the entire surface. However, for safety reasons, it is recommended to use summer tires up to a profile depth of 2 mm, and winter tires - up to a profile depth of 4 mm.