2. Press the brake pedal 2-3 times.
3. Check up size of a course of the lever of a lay brake. Slowly raise the lever until it stops, counting audible clicks.
- Lever travel - 4–7 clicks
1. Adjust the clearance between the brake shoes and the brake drum.
2. Start the engine. Press the brake pedal 2-3 times.
3. Stop the engine.
Pic. 1.176. Parking brake adjusting screw
4. Remove the parking brake lever trim. Turn the parking brake cable adjusting nut to adjust the stroke of the parking brake cable. After adjustment, tighten the adjusting nut (pic. 1.176).
5. After adjustment, carry out the following checks:
- A) turn the ignition key to position «ON», pull out the parking brake lever just one click, check that the parking brake indicator turns on;
- b) make sure the rear wheels turn freely with the parking brake off.
Re-adjust the parking brake lever if necessary.
6. Install the parking brake lever trim.