From the driver's side
1. Disconnect the negative battery terminal.
2. Remove the following parts:
- Side wall on the driver's side.
- Left front heater air duct.
3. Disconnect the mixing flap drive connector.
4. Loosen the screws.
5. Remove the mixing flap drive from the driver's side.
6. Installation is carried out in the reverse order of removal.
From the passenger side
1. Disconnect the negative battery terminal.
2. Remove the following parts:
- The lower cover of the instrument panel.
- Glove compartment.
3. Disconnect the mixing flap drive connector.
4. Loosen the screws.
5. Remove the mixing flap drive from the passenger side.
6. Installation is carried out in the reverse order of removal.