Contents: Removal ⇓ Installation ⇓
Removal
Place the car on a lift, raise the front wheels and remove the lower shield.
Disconnect the stabilizer bar from the suspension arms.
Remove the stabilizer bar mounting bracket from the body and remove the stabilizer bar.
Installation
Check the condition of the cushions in the rod brackets. If the cushions are worn or damaged, replace them.
Install the stabilizer bar on the brackets with cushions, directing the cut of the cushions along the direction of the car's movement. Tighten the nuts and bolts for fastening the brackets.
The article is copied from the website [Mazbook.ru]
Attach the stabilizer bar knees to the suspension arms by tightening the nuts of the connecting pins so that their threaded part protrudes by 10.8 mm (dimension "X", see photo).
Lower the vehicle and tighten the nuts of the stabilizer bar bracket mounting bolts to a force of 3.2-4.7 kgf·m.