Contents: Operation of the air conditioner ⇓ Air conditioner switch ⇓ Instructions for using the air…⇓
Operation of the air conditioner
1. Close the side fresh air deflectors.
2. Set the temperature control lever to the desired position.
3. Start the engine, press the air conditioner switch and set the desired fan speed.
4. Adjustment for maximum cooling power.
5. Type A - Move the temperature lever all the way to the left, set the fresh/circulated air lever to the " position
" and set the fan speed switch to position 4.
6. Type B - Press the fresh/circulated air button until the indicator lights up and set the fan speed switch to position 4.
Air conditioner switch
The air conditioner is turned on and off by pressing the switch.
Note: Even if the air conditioner is not used for a long time, it should be turned on for a few minutes once a week to lubricate the compressor parts.
Type A
Type B
Instructions for using the air conditioner
- If the car has been left in direct sunlight, open a window before turning on the air conditioner so that the heated air can escape.
- When it rains, you can avoid fogging up the windows by lowering the temperature in the car using the air conditioner.
- On slow trains in heavy traffic, the air conditioning capacity is limited due to the engine idling.
- In this case, drive in low gear to improve the air conditioning performance.
- Perform inspection and maintenance work in a timely manner so that it is ready for use at any time.