Contents: Control Panel: Type A ⇓ Control Panel: Type B ⇓ Heater regulator ⇓ Ventilation ⇓ Head and foot compartment ventilation ⇓ Heating ⇓ Heating and defrosting ⇓ Defrosting the windshield ⇓
Control Panel: Type A
Air flow adjustment
The air flow lever allows you to regulate the air supply to the various deflectors.
Setting the fresh/circulated air mode
This lever allows you to switch between fresh air mode and recirculated air mode.
Temperature control
Using this lever you can set the desired temperature.
Fan switch
- OFF — the fan is off
- 1 - low RPM
- 2 - average number of revolutions
- 3 - high RPM
- 4 - very high RPM
Control Panel: Type B
Air flow adjustment
The air flow keys can be used to adjust the air flow on the various deflectors. The keys can be locked and released. The indicator lights up in the locked key.
Fresh/circulated air mode
The key can be set to fresh air or recirculated air mode.
Temperature control
The desired temperature can be set using the temperature lever.
Fan switch
- OFF — the fan is off
- 1 - low RPM
- 2 - average number of revolutions
- 3 - high RPM
- 4 - very high RPM
Type A
Type B
Heater regulator
Turning off fresh air supply
1. Turn off the fan.
Type A: Set the fresh/circulated air lever to the " position
".
Type B: Press the fresh/circulated air key. The indicator lights up.
1. Close the side ventilation deflectors.
Ventilation
Type A
Type B
Head and foot compartment ventilation
Type A
Type B
Data provided by the website: MazBook.ru
Heating
Type A
Type B
Heating and defrosting
Type A
Type B
Defrosting the windshield
Type A
Type B
1. Before starting to move, clear the windshield, side and rear windows of ice and snow.
2. Remove ice and snow from the hood air intake grille to improve heating and defrosting performance and prevent windshield fogging.