Fig. 2.181. Places of application of sealant on the mating surface of the oil pan
Apply a continuous bead of silicone sealant to the mating surface of the oil pan as shown in Figure 2.181.
Fig. 2.182. Alignment of mating surfaces of the oil pan and cylinder block
Use a square to align the mating surfaces of the oil pan and cylinder block (fig. 2.182).
The article is reprinted from the portal [MAZBOOK.RU]
Fig. 2.183. Oil pan mounting bolt tightening sequence
Tighten the rear oil pan mounting bolts in the order shown in Figure 2.183.
Tightening torque: 20–30 Nm.