Removal and installation the fuel filler flap
1. Loosen the bolts.
2. Remove the fuel filler cap.
3. Installation is carried out in the reverse order of removal.
4. Adjust the position of the fuel filler flap.
The original article is available on: Mazbook.ru
Adjusting the position of the fuel filler flap
1. Check the fuel filler flap clearance and height above the body surface.
2. Loosen the bolts and adjust the position of the fuel filler flap.
a: 1.7-3.7 mm
b: -0.5~1.5mm
3. Tighten the bolts.