2. Front doors: remove the inner decorative trim.
3. Insert a flat-head screwdriver wrapped with electrical tape into the position indicated by the arrow (1) in the figure and remove the inner handle cover by disconnecting the strips A and pin B.
4. Loosen screw C.
5. Remove cover D and unscrew screw E.
Front door
Back door
6. Grasping the shaded areas in the figure, pull the door trim in the direction of the arrows in the sequence (1), (2), (3), (4), detaching the clips F, hooks G and pin H.
Front door
Back door
7. Disconnect the bar 1 in the direction of the arrow (5) in the figure.
8. Remove the inner door handle in the direction of the arrow (6) in the figure, detaching the strip J.
9. Disconnect the main connector (driver's door) or local power window switches.
10. Installation is carried out in the reverse order of removal.
Driver's door trim:
1. Power window switch panel cover.
2. Main power window switch.
3. Fixators.
4. Front door trim.
Front passenger door trim:
1. Power window switch panel cover.
2. Electric window switch.
3. Fixators.
4. Front door trim.
Rear door trim:
1. Power window switch panel cover.
2. Electric window switch.
3. Fixators.
4. Rear door trim.