Contents: Removal ⇓ Installation ⇓
Removal
Remove the rear seat cushion.
Remove the pump access door cover.
Disconnect the fuel pump plug.
Disconnect the fuel supply and drain hoses from the pump and close the hose openings with plugs.
Loosen the pump mounting screws and remove it together with the fuel level sensor, having first disconnected its connector.
Installation
Install the pump with the fuel level sensor into the fuel tank, installing a new gasket.
Tighten the pump mounting screws.
Connect the fuel supply and drain hoses to the pump, replacing the clamps.
The original text can be found on MAZBOOK.RU
Insert the terminal blocks through the holes in the body floor and replace the hatch cover.
Connect the plug connectors of the fuel pump and fuel level sensor.
Install the rear seat cushion.