Removing
1. Disconnect the ground cable from the battery.
Attention! This erases the data from the engine fault memory or the radio's security code. Before disconnecting the battery, read the instructions in Section Removing and installing the battery.
2. Mark the position of the wiper blade on the glass with adhesive tape.
3. Open the cover, unscrew the lever and remove it from the motor shaft.
Installation
1. Push the wiper arm in the end position onto the axle and screw firmly 10 Nm. Observe the dimensions given in mm.
Compact | hatchback |
2. Fold down the cover.
3. Connect the mass cable to the battery.
4. Check the operation of the wiper.
5. If available, set the clock and set the radio's security code.