Fig. 2.202. Oil filter: 1 – sealing ring; 2 – oil filter cover
Loosen the oil filter cap 2 turns and drain the engine oil (fig. 2.202).
Remove the oil filter.
Use a clean rag to wipe the seating surface on the adapter and oil filter cover.
Apply clean oil to the new O-ring on the new oil filter and the new oil filter drain plug.
Fig. 2.203. Oil filter components: 1 – adapter; 2 – cover sealing ring; 3 – lid; 4 – drain plug sealing ring; 5 – drain plug
Install the oil filter, oil filter drain plug and oil filter cover (fig. 2.203).
Tighten the oil filter cap and oil filter drain plug.
Tightening torque:
- oil filter cover - 30–35 Nm;
- oil filter drain plug - 9.0–11 Nm.
Start the engine and check for oil leaks.
Check the oil level. Top up if necessary.