Hatchback since 10/89
1 - printed circuit board; 2 - control lamp with cartridge; 3 - instrument panel housing; 4 - hours; 5 - coolant temperature indicator and fuel reserve; 6 - speedometer; 7 - tachometer; 8 - instrument panel housing cover
Sedan/compact since 10/89
1 - control lamp with cartridge; 2 - instrument case; 3 - coolant temperature gauge; 4 - instrument panel housing cover; 5 - tachometer; 6 - speedometer; 7 - fuel gauge
9/85 - 9/89, issue.
1 - bolts; 2 - instrument panel housing cover; 3 - coolant temperature indicator and fuel reserve; 4 - speedometer; 5 - overlay signal lights; 6 - scoreboard; 7 - instrument case; 8 - printed circuit board
1. Screw the speedometer shaft to the gearbox. Route the shaft so that it is not bent. Insert the rubber gasket into the guide bushing of the bulkhead of the engine compartment.
2. Insert and screw on the visor.
3. If removed, install the switch on the steering column. Make sure that the turn signal lever is in the middle position, otherwise the return cam may be damaged.
4. To establish facing of a steering column.
5. Install the steering wheel, see Chapter Suspension and steering system, Chapter Removal and installation of a steering wheel.
6. Connect the battery ground cable.
7. If available, set the clock and set the radio security code.