1. Bolts.
2. Caliper.
3. Brake pads.
4. Gaskets.
5. Holders.
Note: use a special tool or fixture.
2. Installation is carried out in the reverse order of removal, taking into account the following:
- Clean the visible parts of the piston.
- Slowly rotating the piston with the special tool, fully press the piston into the cylinder so that the piston grooves are in the position shown in the figure.
- Install the support.
3. After installation, press the brake pedal several times and check the following:
- The lugs of the brake pads are securely inserted into the grooves of the piston.
- Parking brake lever travel.
- Wedging brakes.