Removal and installation of a forward cable of a drive of a parking brake
1. Adjusting nut.
2. Front parking brake cable.
1. Remove the front console box.
2. Versions with manual transmission: remove the knob of the gear lever.
3. Remove shift lever panel.
4. Remove the top panel.
5. Remove the rear console.
6. Unscrew the adjusting nut and remove the front parking brake cable.
7. Installation is made in an order, the return to removal.
8. After installation, check and adjust the travel of the parking brake lever.
Removal and installation of a back cable of a drive of a parking brake
1. Nuts.
2. Nut.
3. Bolt.
4. Nut.
5. Rear parking brake cable.
1. Remove the front console box.
2. Versions with manual transmission: remove the knob of the gear lever.
3. Remove shift lever panel.
4. Remove the top panel.
5. Remove the rear console.
6. Loosen the adjusting nut.
7. Remove bottom protective tray #2.
8. To turn away all nuts and bolts of fastening of a back cable of a drive of a lay brake to the body bottom.
9. Remove the rear parking brake cable from the front cable.
10. Remove the rear parking brake cable from the rear brake caliper.
11. Remove the rear parking brake cable from the vehicle.
12. Installation is carried out in the reverse order of removal, taking into account the following:
Install the parking brake cable to the rear caliper.
Make sure the outer edge of the parking brake cable is securely engaged with the bracket.
13. After installation, check and adjust the travel of the parking brake lever.