Attention.
- Fill the windshield washer reservoir only with washer fluid or clean water. It is dangerous to use coolant as a washer fluid. If coolant gets on the windshield, visibility through the glass will be impaired, which could lead to an accident.
- In frost, use a windshield washer filled with only a special anti-freeze liquid.
- Using a windshield washer in freezing weather that is not filled with special antifreeze fluid is dangerous, as the fluid will freeze on the windshield. Visibility will deteriorate, which could lead to an accident. At low air temperatures, do not operate the windshield washer without making sure that the windshield is warm enough with warm air.
Note: Because the wiper blades can freeze to the windshield, the wiper motor is protected from damage, overheating, and fire by a circuit breaker. The circuit breaker automatically turns off the windshield wiper (for about five minutes). If this happens, move the wiper control to the position «Turned off» and stop on the side of the road or on the edge of the road to remove snow and ice from the windshield and free the wiper blades. After five minutes, move the wiper control lever to the operating position. The wiper should restart. If the wiper does not work, have your vehicle repaired immediately by an Authorized Mazda Dealer. Observing safety precautions, immediately pull over to the side of the road or to the edge of the roadway and stop. Wait for the weather to improve before driving with the windshield wiper inoperative. Remember that the operation of the vehicle with the windshield wiper or washer inoperative is prohibited.