2. The engine must be warmed up to normal operating temperature.
Attention! The throttle cable is very fragile and must be handled with particular care during installation. Even a slight bend can lead to cable breakage during operation. Cables that have been bent should not be installed.
3. Ask an assistant to fully depress the gas pedal (full throttle position), or fix in this position by placing a block of wood between the seat and the pedal.
4. In the full throttle position, adjust the cable on the counterholder using the locknut so that the injection pump lever rests tension-free against the maximum stop.
5. Release the gas pedal, the injection pump lever should now be in contact with the idle stop.