1. Disconnect the negative battery terminal.
2. Remove switch panel.
3. Loosen the bracket fastening screws.
4. Remove the bracket from the rear console.
5. Move the selector lever to position P.
6. Remove the safety lock in the direction of the arrow (1) in the figure, then remove the fixing element in the direction of the arrow (2) in the picture and unlock the cable.
7. Set the manual shift lever to position P.
8. Press the locking element in the direction of the arrow (1) in the figure, and then press the safety lock in the direction of the arrow (2) in the picture and block.
9. Install the remaining parts in the reverse order of removal.
10. Check the selector lever.