Removing
1. Remove the decorative engine cover.
2. Loosen the wiring harness protection bolt and move the wiring harness to the side.
3. To turn away bolts of fastening of an automatic tensioner of a driving belt.
4. Remove the automatic attachment drive belt tensioner.
Installation
Attention. To ensure proper operation of the automatic drive belt tensioner, it is essential to bleed the air from the tensioner.
Install the automatic attachment drive belt tensioner to the engine.
Attention. To prevent damage to the automatic drive belt tensioner, do not apply excessive force after turning the tensioner all the way.
2. Insert the wrench on the auto-tensioner hexagon and compress and decompress the auto-tensioner three times from lock to lock.
Note: In the process of compressing / unclenching the automatic tensioner from lock to lock, the piston inside the tensioner moves, expelling air.
3. Replace the wire harness and secure the wire harness guard with the bolt.
4. Install the decorative engine cover.