Contents: Replacement ⇓ Total amount of oil ⇓
The following spare parts are required:
- Drain plug gasket.
- Transmission oil according to specification:
- Cars up to 9/89: temperature above -18°C: API GL-4 or GL-5 SAE 90 or 80W-90, temperature below -18°C: ATF Dexron-II.
- Cars produced since 10/89: API GL-4 or GL-5 75W-90 or ATF Dexron-II (BP DOHC: only ATF Dexron-II).
Replacement
1. Raise the vehicle to a horizontal position.
2. If available, remove the engine and gearbox shield.
3. Visually check the tightness of the gearbox.
4. Unscrew the oil drain plug and let the oil drain.
5. Screw in the oil drain plug new with a gasket with force 55 Nm.
[The article is copied from the website: www.MAZbook.ru]
6. Unscrew the oil filler plug on the front side of the gearbox.
7. Fill the gearbox with transmission oil of the appropriate specification up to the lower edge of the filler hole.
Total amount of oil
| Engine | Quantity, l |
| E1, E3, E5 | 3,2 |
| B3, B5, B6 up to 9/89. | 3,2 |
| turbo engine 9/89 year of manufacture. | 3,35 |
| all-wheel drive up to 9/89. | 3,55 |
| B3, B6, BP SOHC since 10/89. | 2,68 |
| BP DOHC | 3,35 |
1. Install the oil filler plug and tighten it firmly 55 Nm.
2. If available, install the engine and gearbox shield.
3. Lower the vehicle.