2. Remove the radiator grille.
3. (Modifications) Disconnect the fog light connectors.
4. When removing the front bumper, refer to the assembly drawing "Front bumper".
5. Carry out removal in the sequence shown in the figure. The tightening torques for the bumper mounting bolts are shown in the figure.
Removal Note:
- Pull the front bumper by the edges in the directions shown in the figure and detach the bumper from the guides.
- Remove the front bumper from the car body.
1 - guide,
2 - front bumper.
Warning: Do not remove the front bumper alone, it may fall and injure you.
[The original article is posted on mazbook]
6. Installation is carried out in the reverse order of removal.
7. After installation, adjust the position of the front bumper if necessary.
8. (Modifications) After installation, adjust the position of the fog lights (see chapter "Body electrical equipment").