2. Remove the radiator grille.
3. Remove the front bumper.
4. When removing the front bumper reinforcement, follow the assembly drawing "Removing and installing the front bumper reinforcement".
Removal and installation the front bumper reinforcement.
1 - bolt "A",
2 - bolt "B",
3 - washer,
4 - nut,
5 - front bumper holder,
6 - front bumper reinforcement.
5. Carry out removal in the sequence shown in the figure. The tightening torques of the bolts and nuts securing the parts are shown in the figure,
6. Installation is carried out in the reverse order of removal.
7. After installation, adjust the position of the front bumper if necessary.