Removing
Pull up the grille and remove it.
Unscrew the three screws securing the container.
Caution: The Tox head bolt on the headlight housing must not be loosened.
Press the headlight to the middle of the car and pull it forward.
Pull off the plug.
Installation
Put the plug on the headlight and fix it.
Install the headlight so that the headlight guide pin fits into the hole on the inside of the fender.
Fasten the headlight with three screws, tightening them with a torque of 6 Nm, i.e. slightly.
Insert grille.
Adjust headlights.