Side door adjustment.
Gap:
- a - 3.5 - 6.5 mm
- b - -1.0 - 1.5 mm
2. If the measured values do not match the specified values, then the position of the doors must be adjusted.
3. Door position adjustment is carried out as follows:
- A) Loosen the door hinge bolts and adjust the position of the doors by moving them in the horizontal and vertical directions.
- b) If necessary, also loosen the screws securing the door lock brackets and adjust their position.
- V) After adjustment, tighten the bolts and screws securing the hinges and lock brackets.