2. (Rear side door) Close the door glass completely.
3. Disconnect the cable from the negative terminal of the battery
4. Remove the door trim panel (see section "Interior trim").
5. Remove the door glass.
6. Remove the inside door opening handle.
7. When disassembling the door mounting panels, follow the assembly drawings "Disassembling and assembling the front door" and "Disassembling and assembling the rear side door".
Disassembly and assembly of the front door.
1 - front door,
2 - door seal,
3 - glass seal,
4 - door glass guide,
5 - lower door glass guide,
6 - bushing,
7 - door glass,
8 - door mounting loop,
9 - inner handle trim,
10 - inner handle,
11 - bushing,
12 - protective screen,
13 - spacer (models without speaker),
14 - damper,
15 - bushing,
16 - outer handle,
17 - nut,
18 - front door travel limiter,
19 - front door lock,
20 - lock rod holder,
21 - window lift mechanism (models with electric drive),
22 - electric motor of the window lift mechanism (models with electric drive),
23 - retainer (models with electric drive),
24 - window lift mechanism (models without electric drive),
25 - window lift handle (models without electric drive),
26 - door lock bracket.
Disassembly and assembly of the rear side door.
1 - rear side door,
2 - door seal,
3 - door mounting loop,
4 - finishing the hole for installing glass,
5 - lower door glass guide,
6 - door glass mounting bracket,
7 - door glass,
8 - glass guide,
9 - inner handle trim,
10 - inner handle,
11 - bushing,
12 - protective screen,
13 - spacer (models without speaker),
14 - damper,
15 - outer handle,
16 - nut,
17 - rear side door travel limiter,
18 - plug,
19 - rear side door lock (models without electric drive),
20 - rear side door lock (models with electric drive),
21 - lock rod holder,
22 - window lift mechanism (models without electric drive),
23 - window lift handle (models without electric drive),
24 - window lift mechanism (models with electric drive),
25 - electric motor of the window lift mechanism (models with electric drive),
26 - door lock bracket.
Note: the pictures show the disassembly and assembly of the side doors for the Mazda BT-50. Disassembly and assembly of the side doors of the Ford Ranger is similar.
8. Assembly is carried out in the reverse order of disassembly.