Allows you to turn on the radio and switch between FM1/FM2/AM ranges. The display shows the selected range indicator.
2. Search for radio stations manually.
(Type 1) By pressing the buttons briefly
or 
the manual search mode for radio stations up or down the scale of the selected range is activated. The frequency of the selected radio station is displayed on the display.
(Type 2) To search radio stations up or down the range scale, turn the knob "TUNE/AUDIO CONT".
3. Automatic search for radio stations. When pressing and holding until a beep (type 1) or when pressing (type 2) one of the buttons
or 
the automatic search mode for radio stations up or down the scale of the selected range will be activated.
Automatic mode will turn off as soon as a stable radio signal is found.
During stereo reception, the "ST" indicator appears on the display.
4. Programming and switching radio stations.
The settings of the most frequently listened to radio stations can be saved in memory and switched to by pressing one of the buttons "1" - "6". To program the settings, do the following:
Tune to the desired radio station using the buttons
and 
or pens "TUNE/AUDIO CONT".
Press and hold one of the buttons "1" - "6" until you hear a beep.
Note: When disconnecting the radio, replacing the battery or replacing the fuses, the memory of the radio settings is erased.
5. (Type 1) Familiarization listening to radio stations.
When you press the "SCAN" button, the receiver starts searching up the range scale and plays each radio station for a few seconds.
To select the desired station, you must press the "SCAN" button again.
6. Automatic radio station search mode.
When you press the "AUTO-M" button, the radio station is automatically tuned to the setting buttons "1" - "6" if a stable signal is found.
Information copied from the portal: MazBook.ru
Note:
- Each radio station search mode, both manual and automatic, allows you to tune in 6 AM, FM1 and PM2 radio stations independently of each other.
- Automatic programming of six radio stations occurs in descending order of signal reception quality.
- If no radio station has been programmed during the automatic radio station search, the "A" indicator will light up on the display.
7. Alternative frequency.
The alternative frequency functions on FM stations. To turn on the alternative frequency, press the "AF" button and the "AF" indicator will appear on the display. If you want to continue receiving the regional program, press the "AF" button again and hold it for 2 seconds until you hear a beep. The display will show "REG ON". To cancel receiving the regional program, press the "AF" button again and hold it for 2 seconds until you hear a beep. The display will show "REG OFF".
8. Movement announcements.
If the "TA" button is pressed while the radio is operating, the device switches to the traffic announcement mode and the display shows "TP". In this mode, only traffic announcements are searched for. If the tuned radio station does not transmit traffic announcements when the "TA" button is pressed, the radio will automatically start searching for one in another network after 20 seconds. If no suitable station is found, the display shows "NOTHING" and the system returns to the previously tuned station. This function does not work in the Russian Federation.
Note: When receiving a traffic announcement program, its broadcast will supersede the radio, tape, MD or CD playback. To exit the traffic announcement mode and return to the previous mode, press the "TA" button.
9. Information about the program type.
While listening to a radio station, press the "RTU" button, the display will show "RTU".
To select the program type, press the "RTU" button, then use the buttons to search for the program type
and 
.
The device will scan for broadcasts, if the program type is not found, the device will return to the previously configured range.
10. To turn off, press the "PWRVOL" button.