Pull out the power window switch bezel with a screwdriver
2. Remove the inner cover of the door handle (photo).
Door handle inner screw (arrow)
3. Remove the screws securing the armrest (photo).
Using a screwdriver, remove the cover to access the armrest screw
4. Remove the trim panel by releasing it along the base using a large screwdriver or spatula to disengage the retainers. These latches must be removed very strongly and carefully so as not to break them when removed (photo).
Insert a screwdriver or spatula between trim panel and door, and carefully remove each bracket
5. Remove the panel by lifting it up and unhooking the door lock handle (photo).
Remove trim panel by lifting (arrow) after disengaging from the door lock
6. Carefully remove the waterproof film to access the inner door panel (photo).
Be careful when removing the waterproof film so as not to stretch or tear it
7. Assembly is carried out in reverse order, noting the following.
8. Gently put the waterproof film back and place it correctly.
9. When installing the trim panel on the door, place the top of the panel over the lock handle and press the trim panel down to secure it.
10. Position the trim panel on the inside door panel so that the tabs fit into the holes in the door panel and use your lower hand to push the tabs into the holes.