Contents: Front seats ⇓ Rear seats ⇓
The seats and joints are folding
1. Lids; 2. Height regulator; 3. Folding; 4. Lumbar adjuster holder; 5. Side holder regulator; 6. Slide regulators; 7. Headrests; 8. Rear backrests of the front seat; 9. Rear seat cushions
Seats and Seat Joints - Sedan and Coupe. The insert shows how to remove the rear seat cushion
Front seats
1. If heated seats are installed, disconnect the negative battery cable.
2. Move the seat all the way back and remove the screws securing the front ends of the seat bushings to the floor.
3. Move the seat as far forward as possible and remove the two rear mounting screws.
4. Remove any side trim that may interfere with seat removal. Disconnect the wiring harness from the seat heater (when equipped) and remove the seat.
5. Assembly is carried out in reverse order. Apply a small amount of grease to the slide.
Apply a little grease to the seat rails
Rear seats
6. The rear seat cushion can be removed by pressing it down and back, then lifting it up. The hinge type cushion can be rotated, after which the hinges or hinge pins can be unscrewed.
7. Now you can unscrew and remove the seat back holders or hinges, seat back.
8. Assembly is carried out in reverse order.