Attention.
- Adjustment of the automatic transmission fluid level should be performed only when the fluid temperature is 45-55°C. If the fluid level is not correct, the gearbox may be damaged.
- Do not fill the automatic transmission fluid with more than necessary. Otherwise, the transmission performance may decrease and leaks of the automatic transmission fluid may occur.
1. Loosen the measuring probe mounting bolt.
2. Remove the dipstick.
3. Adjust the automatic transmission fluid level:
Connect the M-MDS device to the DLC-2 connector and display the PID TFT.
Warm up the gearbox to a working fluid temperature of 50°C.
With the engine idling, remove the dipstick and wipe off any remaining automatic transmission fluid with a rag.
Insert the dipstick and remove it again.
Make sure that the automatic transmission fluid reaches the middle between the marks on the dipstick. If the automatic transmission fluid level differs from this value, adjust the amount of fluid in the gearbox.
Note.
- Automatic transmission fluid is blue in color.
- Use only ATFFZ automatic transmission fluid.
4. Insert the measuring probe and tighten the mounting bolt to a torque of 8-11 Nm.